other

Which Stretch Wrapping Machine Fits Your Pallets?

Nov 17, 2026

Pallets leave the dock half-wrapped, and loads shift in transit. Damage, rework, and claims follow the load.

This guide explains the stretch wrapping machine: what it is, the two main types, and how to size film. It helps you pick the right machine.

What Is a Stretch Wrapping Machine?

What It Does

A stretch wrapping machine wraps stretch film around a pallet load. The film stretches, grips the load, and holds it as one unit.

The machine wraps from the base to the top of the load. A typical cycle takes one to two minutes per pallet.

Difference from Shrink Wrapping

Stretch wrapping uses cold film and no heat. Shrink wrapping uses heat-shrink film and a heat tunnel.

Stretch film suits most pallet loads and needs no heat tunnel. Shrink film suits loads that need a tight, tamper-evident skin.

Which Type Fits Your Load?

Turntable

A turntable stretch wrapping machine spins the pallet on a rotating table. The film carriage rises and falls beside the pallet.

Turntable suits stable, regular loads on a standard pallet. A typical turntable line wraps 15–60 pallets per hour.

The turntable holds loads up to 1,200–2,000 kg, a typical range. The table runs 1,650–2,000 mm in diameter at 8–15 rpm.

Rotary Arm

A rotary arm stretch wrapping machine keeps the pallet still and spins the arm around it. The film carriage rides on the arm and wraps the load.

Rotary arm suits heavy, tall, unstable, or light loads that cannot spin. A typical rotary arm line wraps 30–80 pallets per hour.

The arm wraps faster than a turntable on the same load. It needs more floor space, so check the layout first.

Orbital

An orbital stretch wrapping machine passes the load through a rotating ring. The ring wraps film around the load as it moves through.

Orbital suits long products such as doors, pipes, and profiles. It does not wrap standard pallets, so most warehouses skip it.

How Much Film Does Pre-Stretch Save?

Powered Pre-Stretch 200–300%

A powered pre-stretch carriage stretches the film before it reaches the load. The film stretches 200–300% on a typical turntable machine.

At 250% pre-stretch, 1 metre of film becomes 3.5 metres on the pallet. The same roll covers far more pallets than hand wrapping.

Film Gauge by Load

Pick the film gauge by the load weight and shape. Light loads under 500 kg use 15–17 microns of cast film.

Medium loads use 17–20 microns. Heavy or sharp loads need 23 microns or more, in blown film.

Film Cost per Pallet

Hand wrapping uses about 1.2 kg of film per pallet. A 250% pre-stretch machine uses about 0.55–0.7 kg per pallet.

Pre-stretch saves 22–30% of film against hand wrapping. Moving from 200% to 300% pre-stretch saves $15,000–25,000 a year at 100 pallets a day, a typical figure.

How Many Pallets per Hour Do You Need?

Throughput Bands

Under 10 pallets a day, hand wrapping still makes sense. From 10 to 50 pallets a day, a semi-automatic turntable pays.

Above 50 pallets a day, an automatic machine or a rotary arm pays. A turntable inline line runs 25–40 pallets per hour.

Peak Buffer 20%

Size the machine for the peak hour, not the average day. Add a 20% buffer above the peak rate.

A warehouse that peaks at 40 pallets an hour needs a 48-pallet machine. Without the buffer, the wrapper becomes the bottleneck.

Semi-Auto vs Fully Auto

A semi-automatic machine needs a forklift to load and unload the pallet. The operator starts each cycle by hand.

A fully automatic machine connects to a conveyor and wraps without an operator. It suits lines that run without breaks.

Is a Stretch Wrapping Machine Right for Your Warehouse?

Daily Volume

Count the pallets wrapped each day across the warehouse. Under 10 a day, hand wrapping costs less than a machine.

Above 10 a day, a machine pays for itself in film and labour. The payback shortens as the daily count rises.

Load Stability

Stable loads spin well on a turntable. Tall, unstable, or light loads need a rotary arm, because the load stays still.

Check the tallest and lightest pallets on the floor before you order. The worst pallet decides the machine, not the average one.

Space

A turntable needs a small footprint beside the conveyor or dock. A rotary arm needs a wider circle for the arm to swing.

Measure the floor space before you pick a type. A machine that cannot fit the floor cannot run the line.

What Stretch Wrapping Machines Does LINK Make?

LINK Machinery makes the FG800B stretch film wrapping machine for smaller loads. It uses power pre-stretching, runs a 400 or 600 mm turntable, and holds up to 60 kg.

The machine takes loads up to 1,000 mm high and runs on a PLC with a 7.2-inch touchscreen. See the FG800B stretch film wrapping machine for the current model.

The cartons on the pallet come sealed from LINK too. The WSC-K40E carton forming and bottom sealing system opens cartons and folds the bottom flaps. It tape-seals the bottom at 10–12 cartons a minute.

Conclusion

Match the machine to the load, not the other way round. Load stability picks the type, pre-stretch picks the film cost, and daily volume picks the automation level. Talk to LINK Machinery, a CE and RoHS certified China factory, for a stretch wrapping machine sized to your pallets.

Frequently Asked Questions

1. What is a robot stretch wrapping machine?

A robot wrapper drives around a stationary pallet and wraps it in place. The load never moves, so the robot suits loads that cannot spin on a turntable. It needs no fixed station, so one robot can serve several packing points in the warehouse.

2. How do you test containment force on a stretch wrapping machine?

Test per ASTM D4649, the standard for stretch wrap containment. The test pulls the film and measures the force that holds the load together. A tilt test also checks the load: tilt the pallet and watch whether the load shifts.

3. How much does a stretch wrapping machine cost?

A semi-automatic turntable machine costs about $4,500, a typical list figure. A rotary arm machine costs about $22,000, a typical list figure. The film saving and labour saving decide the payback, not the list price alone.

4. What is a top sheet dispenser on a stretch wrapping machine?

A top sheet dispenser lays a film sheet over the top of the pallet before wrapping starts. The sheet keeps dust and rain off the top cartons. It suits outdoor storage and long transit times.

5. How tall a load can a stretch wrapping machine wrap?

A rotary arm machine wraps heights up to 2,400 mm, a typical figure. A turntable machine wraps to the mast height, so check the mast against your tallest pallet. Measure the tallest pallet on the floor first.

6. Can a stretch wrapping machine wrap a load without a pallet?

Yes, if the load sits on a slip sheet or a flat base. The turntable needs a flat bottom, so a bare load needs a sheet under it. The sheet also protects the bottom cartons from forklift forks.

ฝากข้อความ
ฝากข้อความ
หากคุณสนใจในผลิตภัณฑ์ของเราและต้องการทราบรายละเอียดเพิ่มเติม โปรดฝากข้อความไว้ที่นี่ เราจะตอบกลับโดยเร็วที่สุด

บ้าน

สินค้า

whatsapp