other

How to Choose a Metal Detector for Your Packaging Line

Nov 12, 2026

Introduction

One metal fragment in a pack can trigger a recall, a fine, and a lost retail contract. You run a food packaging line, and buyers expect every pack clean.

This guide shows how a metal detector protects the line. It covers sensitivity, standards, selection rules, and running costs.

What a Metal Detector Does on Your Packaging Line

Ferrous, Non-Ferrous and Stainless Steel

A metal detector finds three types of metal in a pack. Ferrous metal, such as iron and steel, gives the strongest signal. Non-ferrous metal, such as aluminium, brass, and copper, gives a weaker signal. Stainless steel gives the weakest signal of all, because its magnetic response is low.

Sensitivity is quoted as the smallest test sphere the machine can find. A smaller sphere means higher sensitivity. Grade 316 stainless steel is the hardest metal to find, so test all three metals before you buy.

Contamination Caught Before Shipping

It checks every pack on the line, not a sample. A suspect pack trips the reject system at once, so it never reaches a carton. One missed fragment can cost a recall, so full inspection beats sampling.

Place it after the sealing station to catch contamination from the whole process. A throat unit before the bag former protects the packaging machine itself from damage. Many food plants use both positions on one line.

Partner to Your Checkweigher

A metal detector and a checkweigher guard different risks on the same line. It catches metal; the checkweigher catches underweight and overweight packs. Together they form one inspection line that protects both safety and weight rules.

Add the two machines in one step when you plan a new line. A combined inspection line shares one conveyor, one reject system, and one operator.

What Decides Its Sensitivity?

Sensitivity is not one number on a data sheet. The aperture, the product, and the pack all move the result.

Aperture Size

The aperture is the opening the pack passes through. It must clear the largest pack with a small margin. A tighter aperture gives higher sensitivity, because the metal signal weakens fast as the pack moves away from the coils.

A typical tunnel unit offers a detection width of 200–450 mm and a height of 50–320 mm. Size the aperture for the widest pack plus 30–50 mm of clearance. A pack that is too tall for the aperture needs a larger head, not a stronger setting.

Product Effect

Wet, salty, or conductive products create a product effect. The product itself sends a signal that looks like metal to the coils. The machine must learn the product first, or good packs will trip false rejects.

Run the real product through the machine during the test, not an empty belt. Moisture, salt content, and temperature all shift the signal. A detector set on dry samples will fail on wet lines.

Pack Material and Foil

Standard plastic bags, pouches, and cartons work well with a metal detector. Aluminium foil and metalised film block the field, so the machine cannot see through them. A foil pack needs a different check, such as X-ray inspection or a throat unit before filling.

Check the pack material before you choose the inspection method. It suits dry snacks in plastic film; a foil pouch suits X-ray.

Which Standards Does a Metal Detector Need to Meet?

HACCP and Food Safety Plans

Metal detection is a critical control point in many HACCP plans. The hazard list names metal from worn machine parts as a real risk. The plan sets a critical limit, and the machine holds the line to it.

Write the limit from your risk assessment, not from a brochure. A limit that is too tight causes false rejects; a limit that is too loose misses real metal.

BRCGS and IFS Requirements

BRCGS and IFS audits ask for foreign-body controls on every food line. It is the standard control for metal, with written procedures behind it. The auditor checks the procedure, the test records, and the corrective actions, not just the machine.

Keep the procedure short and clear, so any operator can follow it. A procedure nobody follows is worse than no procedure at all.

Validation and Audit Records

Validation proves the metal detector works on your real product, not on an empty belt. Test with certified test pieces in ferrous, non-ferrous, and stainless steel. Pass each piece through the centre and the edges of the aperture.

Record every test with time, product, and result. A failed test stops the line until the cause is fixed. Re-check the packs made since the last good test, and keep the records for at least one year.

How to Choose the Right Metal Detector for Your Line?

Conveyor Metal Detector

A conveyor metal detector, also called a tunnel unit, checks sealed packs on a belt. The pack passes through a rectangular aperture in the detection head. A typical unit runs a belt speed of 10–60 m/min and a load of 5–10 kg.

Use a conveyor unit after the sealing station, where it checks every finished pack. A pusher or air jet removes a suspect pack without stopping the belt. Match the belt speed to your filler, so the detector never becomes the bottleneck.

Throat Metal Detector

A throat unit checks loose product as it falls through a pipe. It sits between the weigher and the bag former, before the pack exists. It protects the packaging machine from metal damage and finds the contaminant sooner.

Use a throat unit for powders, granules, and small pieces that fall freely. It cannot check a sealed pack, so pair it with a conveyor unit when the pack itself must be checked.

Selection Criteria

Start with the largest pack that will cross the detector, including height, width, and length. The aperture must clear it with a small margin. Then set the sensitivity target from the certified standard and the risk assessment.

Test the real product, the real pack, and the real line speed before you order. Check the reject method, the cleaning access, and the floor space it takes. Buy the smallest machine that still hits the sensitivity target at full speed.

What Does It Cost to Run?

Machine Price and Options

A larger aperture, a higher sensitivity, and a faster reject system all add to the price. A throat unit usually costs less than a conveyor unit of the same sensitivity. List the options the buyer requires before asking for a quote.

A washdown rating, such as IP65, costs more but suits wet food lines. A standard unit suits dry snacks and costs less to keep.

Testing and Validation Time

Every validation check stops the line for a few minutes. A typical check takes 5–10 minutes, including the test pieces and the record. Short checks matter most when you test every 1–2 hours.

Train two operators on the test routine, so a sick day never skips a check. A missed check leaves the packs since the last test unproven.

False Rejects and Downtime

A false reject wastes a good pack and slows the line. Product effect and wrong sensitivity settings cause most false rejects. Keep false rejects below 0.5% of packs once the line is set up.

Clean the belt and the aperture each shift, because product dust shifts the signal. A clean machine holds its sensitivity longer and stops the line less.

Conclusion

A metal detector is insurance against a recall. Match the aperture to the largest pack, set the sensitivity from real product tests, and validate it every shift. Talk to LINK Machinery, a CE and RoHS certified China factory, and get a detector sized for the line.

Frequently Asked Questions

1. What size of metal can a metal detector find on a packaging line?

A typical unit finds ferrous spheres of 0.5 mm and non-ferrous spheres of 0.7 mm. Stainless steel spheres of 1.0 mm are the hardest test, because grade 316 gives the weakest signal. Real products lower the result, because wet or salty food creates a product effect. Always test with your actual product and pack at line speed.

2. Can a metal detector check products in foil pouches?

No. Aluminium foil and metalised film block the field, so the machine cannot see through them. Check the product before it enters the foil pouch, with a throat unit between the weigher and the bag former. For finished foil packs, use X-ray inspection instead.

3. Where should a metal detector sit on a packaging line?

After the sealing station, where it checks every finished pack and catches contamination from the whole process. A throat unit before the bag former protects the packaging machine and finds metal sooner. Many food plants use both positions on one line.

4. Does a metal detector replace an X-ray machine?

No. The machine finds only metal: ferrous, non-ferrous, and stainless steel. X-ray finds metal plus glass, stone, bone, and dense plastic. Use X-ray when the hazard list includes glass or stone; use metal detection when metal is the only hazard.

5. How often should a metal detector be tested?

Test at the start and end of every shift, and at set intervals during production. A typical interval is every 1–2 hours. Use certified test pieces in all three metals. Pass each piece through the centre and the edges of the aperture.

6. Can one metal detector handle different pack sizes?

Yes, if the aperture clears the largest pack. Size the aperture for the widest pack plus 30–50 mm of clearance. Change the guides and settings at each changeover, then re-test with test pieces in all three metals.

ฝากข้อความ
ฝากข้อความ
หากคุณสนใจในผลิตภัณฑ์ของเราและต้องการทราบรายละเอียดเพิ่มเติม โปรดฝากข้อความไว้ที่นี่ เราจะตอบกลับโดยเร็วที่สุด

บ้าน

สินค้า

whatsapp